We can provide
power transformer which use for 117V, 120V, 220V, 230V, 240V.
YouTube channel > Otomon YouTube Channel
Facebook Channel: Otomon Vintage FB
YouTube channel > Otomon YouTube Channel
Facebook Channel: Otomon Vintage FB
I will give discount 10% or more for all item in my eBay listing, Contact Us for more detail
Pair LUX AS-10 speaker transformer attenuator for YL, JBL, ALTEC 4,8,16 ohm 100Hz
Technical data is just an improve that item was tested carefully before sending to customer. While our products consistently achieve good to excellent technical figures compared to commercial alternatives, those numbers serve only to confirm that the design contains no engineering errors.
We could, in most cases, apply active techniques to make the specifications look even more impressive — but if doing so strips away originality or musical character, we will not do it. Our aim is to build equipment that sounds beautiful, not equipment that measures beautifully.
At OTOMON, music is judged by the ear and no instrument can replicate the human 's ear.
We could, in most cases, apply active techniques to make the specifications look even more impressive — but if doing so strips away originality or musical character, we will not do it. Our aim is to build equipment that sounds beautiful, not equipment that measures beautifully.
At OTOMON, music is judged by the ear and no instrument can replicate the human 's ear.
LUX AS-10 speaker transformer attenuator for YL, JBL, ALTEC 4,8,16 ohm 100Hz. Can be used with 4,8,16 ohm speaker unit, handle for higher than 100Hz
Constant impedance attenuator. You can use with 4,8,16 ohm unit. This is transformer attenuator, low loss and more beautiful for sound.
The constant impedance method allows you to adjust the volume without sacrificing sound quality. The attenuation amount is an 11-stage switching type with 2dB steps, and can be attenuated up to -20dB.
The handling capacity is 50W when the included dummy load is connected.
Usage frequency range: 100Hz to 30kHz
Distortion rate 0.11% (200Hz, 100W, 16Ω load)
Attenuation: Maximum -20dB, 2dB steps
Handling capacity 100W (when attached dummy load is connected)
Constant impedance attenuator. You can use with 4,8,16 ohm unit. This is transformer attenuator, low loss and more beautiful for sound.
The constant impedance method allows you to adjust the volume without sacrificing sound quality. The attenuation amount is an 11-stage switching type with 2dB steps, and can be attenuated up to -20dB.
The handling capacity is 50W when the included dummy load is connected.
Usage frequency range: 100Hz to 30kHz
Distortion rate 0.11% (200Hz, 100W, 16Ω load)
Attenuation: Maximum -20dB, 2dB steps
Handling capacity 100W (when attached dummy load is connected)
The Other Same Items
Newest Items In Same Category
