We can provide
power transformer which use for 117V, 120V, 220V, 230V, 240V.
YouTube channel > Otomon YouTube Channel
Facebook Channel: Otomon Vintage FB
YouTube channel > Otomon YouTube Channel
Facebook Channel: Otomon Vintage FB
I will give discount 10% or more for all item in my eBay listing, Contact Us for more detail
OTOMON LAB 101D/205 compatible tube amplifier stereo, miniwatt amp, preamp, headamp
Technical data is just an improve that item was tested carefully before sending to customer. While our products consistently achieve good to excellent technical figures compared to commercial alternatives, those numbers serve only to confirm that the design contains no engineering errors.
We could, in most cases, apply active techniques to make the specifications look even more impressive — but if doing so strips away originality or musical character, we will not do it. Our aim is to build equipment that sounds beautiful, not equipment that measures beautifully.
At OTOMON, music is judged by the ear and no instrument can replicate the human 's ear.
We could, in most cases, apply active techniques to make the specifications look even more impressive — but if doing so strips away originality or musical character, we will not do it. Our aim is to build equipment that sounds beautiful, not equipment that measures beautifully.
At OTOMON, music is judged by the ear and no instrument can replicate the human 's ear.
OTOMON LAB 101D/205 compatible tube amplifier stereo, miniwatt amp, preamp, headamp
This can be used as preamp and headphone amplifier, output uses vintage Sansui transformers
Power amp specification (No NFB)
Response frequency : 16Hz~50KHz
Input : 100K ohm
Output : 6,8, 16 ohm
Hum level: 0.3mV
THD: 2W 5%
Preamp/Headphone amplifier specification
Response frequency : 10Hz~70KHz
Input : 100K ohm
Output : 64 ohm
Hum level: 0.3mV
Tube set on amplifier
Prestage : 396A
Power stage: 101D/205D
Rectifier tube: 80 or 83/5Z3
Tubes are not included. Original version is 100V, but can changed to 117V, 230V
This can be used as preamp and headphone amplifier, output uses vintage Sansui transformers
Power amp specification (No NFB)
Response frequency : 16Hz~50KHz
Input : 100K ohm
Output : 6,8, 16 ohm
Hum level: 0.3mV
THD: 2W 5%
Preamp/Headphone amplifier specification
Response frequency : 10Hz~70KHz
Input : 100K ohm
Output : 64 ohm
Hum level: 0.3mV
Tube set on amplifier
Prestage : 396A
Power stage: 101D/205D
Rectifier tube: 80 or 83/5Z3
Tubes are not included. Original version is 100V, but can changed to 117V, 230V
The Other Same Items
Newest Items In Same Category